TE0703 Baseboard

TE0703 Baseboard

Overview

The Trenz Electronic TE0703 carrier board provides low-cost connection and extension to the Trenz Electronic TE0720 Zynq SoC micromodules.

Key Features

  • Carrier Controller CPLD (Lattice LCMXO2-1200HC)
  • 2 x VG96 Connectors (Mounting Holes and Solder Pads)
  • SDIO Port Expander with Voltage-Level Translation
  • Micro SD Card Connector - Zynq SDIO0 Bootable SD port
  • 4 x User LEDs
    • D1 and D2 are connected to the Carrier Controller, their function depends on the Firmware
    • D3 and D4 are connected to the 4x5 Module B2B Connector pins, and are directly controlled by the module
  • Mini USB Connector (USB JTAG and UART Interface)
  • 1 x User Push Button
    • Connected to "intelligent Carrier Controller (iCC)" and can be used as module reset button. Other usage possible, actual function depend on the code loaded into iCC.
  • RJ45 GbE Connector
  • USB Host Connector
  • Barrel jack for 5V* Power Supply
  • 4A High-Efficiency Power SoC DC-DC Step-Down Converter with Integrated Inductor (Enpirion EN6347) for 3.3V Power Supply
  • Trenz 4x5 Module Socket (3x Samtec LSHM Series Connectors)
  • USB JTAG and UART Interface (FTDI FT2232H), compatible with Xilinx Tools (also with many other tools)
  • 4 User DIP Switches
    • Enable/disable update of the "intelligent Carrier Controller"
    • MIO0 (readable signal by iCC and Module)
    • 2 "Mode" bits

Pricing, Availability and Ordering

  • Concurrent EDA is the US Distributor for Trenz Electronic FPGA Micromodules.
  • Please email Ray at This e-mail address is being protected from spambots. You need JavaScript enabled to view it for pricing and availability.

Contact

Telephone
412.687.8800
Address
5001 Baum Blvd Ste 640
Pittsburgh PA 15213
Email
info@concurrenteda.com