•  

Carrier Boards Overview

TEBT0808 test fixture TEBF0808 test fixture
TE0701 carrier board TE0703 carrier board

Developing your own interfaces for FPGA prototyping is both expensive and time consuming, which is why Trenz provides a variety of carrier boards so that you can focus on development, not setup.

Trenz carrier boards provide low-cost connection and extension to a variety of FPGA modules, which makes "plug & play" an easy and viable solution for FPGA prototyping.

 

ModelModuleForm FactorPower Options
TE0143-01 Spartan-3 115 x 72 mm DC Jack / USB
TE0303-01NC Spartan TE0300/TE0630 115 x 70 mm DC Jack / USB
TE0323-00 Spartan-3A 115 x 70 mm DC Jack
TE0603-03 Spartan-6 TE0600 115 x 70 mm DC Jack
TE0703-05 Zynq 4x5 4 x 5 cm 5V Barrel Jack
TE0701-06 Zynq 4x5 4 x 5 cm 12V Power Supply
TE0705-04 Zynq 4x5 4 x 5 cm 12V Power Supply
TE0706-02 Zynq 4x5 4 x 5 cm DC Jack
TEB0728-02 Zynq TE0728 Not Available DC Jack
TEB0729-03A Zynq TE0729 (w/ USB) Not Available 5V DC Power Supply
TEB0745-02 Zynq TE0745 20 x 23.1 cm 24V Power Supply
TEBA0714-01 Artix TE0714 Not Available Not Available
TEBB0714-01 Artix TE0714 Not Available Not Available
TEBT0782-01 TE0782 115 x 115 mm 12V Input
TEBT0808-01 TE0808/TE0803 Not Available 3.3V Input
TEBF0808-04 TE0808/TE0803 UltraITX+ Mini-ITX ATX 12V Power Supply
12V DC Plug Optional
TEBA0841-02 TE0841/TE0741 Not Available Not Available

Contact

Telephone
412.687.8800
Address
5001 Baum Blvd Ste 640
Pittsburgh PA 15213
Email
info@concurrenteda.com