TE0600 Spartan 6 Module Datasheet

Overview

Trenz Electronic TE0600 GigaBee XC6SLX series are industrial FPGA micromodules integrating a leading-edge Xilinx Spartan-6 LX FPGA, Gigabit ethernet transceiver (physical layer), two independent banks of 16-bit-wide 128 MBytes DDR3 SDRAM (optional 2 x 512 MByte DDR3 SDRAM in 2 banks), 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via robust board-to-board (B2B) connectors.

All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Sample Applications

• Cryptographic hardware module
• Digital signal processing
• Embedded educational platform
• Embedded industrial OEM platform
• Embedded system design
• Emulation platforms
• FPGA graphics
• Image processing
• IP (intellectual property) cores
• Low-power design
• Parallel processing
• Rapid prototyping
• Reconfigurable computing
• System-on-Chip (SoC) development

Key Features

• High performance Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150
• FPGA Design Security Solution
• 10/100/1000 tri-speed GBit Ethernet transceiver (PHY)
• 2 independent 16-bit-wide 1 GBit (128 MByte) DDR3 SDRAM
  (optional: 2 independent 4 GBit (512 MByte) DDR3 SDRAM in 2 banks)
• 128 MBit (16 MByte) SPI Flash memory (for configuration and operation)
• JTAG port (SPI indirect)
• FPGA configuration through:
  • B2B connector
  • JTAG port
  • SPI Flash memory
• Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
• Up to 52 differential, up to 109 single-ended (+1 dual-purpose) FPGA I/O pins available on B2B strips
• High-efficiency DC-DC switching regulators
• 125 MHz reference clock signal
• Single-ended custom oscillator (optional)
• eFUSE bit-stream encryption (LX100 or larger)
• 1 user LED
• Evenly-spread supply pins for good signal integrity
• Other assembly options for cost or performance optimization available upon request.

Specifications

• Xilinx Spartan-6 LX FPGA (See model overview below)
• 10/100/1000 GBit Ethernet transceiver (physical layer) Marvell Semiconductor 88E1111
• 128 MBit (16 MByte) serial Flash memory with dual/quad SPI interface
• 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress)
• 1 KBit Protected 1-Wire EEPROM with SHA-1 Engine Maxim Embedded Security Products DS2432
• 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR
• Up to 52 differential FPGA input/output pins available on B2B strips
• Up to 109 single-ended (+1 dual-purpose) FPGA input/output pins available on B2B strips
• Ethernet (PHY), JTAG and SPI pins available on B2B strips
• 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2 V
• 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5 V
• 2 x 800 mA DC-DC linear regulator for power rails 2.5 V and VCCAUX
• Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33
• 125 MHz clock signal (system + user)
• Footprint for custom single-ended oscillator (option)
• Power supply voltage: 3.3 V
• Dimensions: 50 mm × 40 mm (20 cm²)
• Stacking height: 8 mm
• Maximum height on carrier board surface: 12 mm (standard connectors)
• Weight: 17.2 ± 0.1 g

Heatsink - Spring-Loaded

Made especially for TE0600 board, spring-loaded, weight: 60g

Part No. 26920

Package ContentS

• 1 Thermal Pad
• 4 pressure springs
• 4 screws

Resources

• Revision 01 changes to Revision 02, please read the product change notification here.
• Example projects

Available Models

Pricing, Availability and Ordering

• Concurrent EDA is the US Distributor for Trenz Electronic FPGA Micromodules.
• Please email Ray at This email address is being protected from spambots. You need JavaScript enabled to view it. for pricing and availability.